Caltech provides chiller calibration in the UAE for the temperature sensors, probes, and controllers on chillers. The check is done at the chiller in Dubai, Sharjah, Abu Dhabi, or at the customer’s site. The readings are compared with a reference thermometer, and a calibration certificate is issued. Call +971 50 485 0456 with the sensor type, the temperature range, and the site address.
A chiller can show one temperature on the display while the sensor reading is off. Chiller calibration checks that sensor, probe, or controller against a reference thermometer at agreed points. This is a calibration of the temperature measurement on the chiller. It is not a repair of the compressor, and it is not a chemical clean.
Where the work is done
The technician comes to the chiller. Suitable jobs can be done in Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain. Send the site address with the request. The quotation confirms the visit time.
What is checked
- Temperature sensor on the chiller
- Probe in the water or air circuit
- Controller or display that shows the chiller temperature
- Readings at the agreed temperature points
- The difference between the chiller reading and the reference thermometer
The certificate records the instrument, the points tested, the readings, and the test date.
What to send for a quotation
- Chiller location and site address
- Sensor or controller type
- Temperature range
- Number of chillers
- Preferred visit date
Phone: +971 50 485 0456
Email: info@caltech-eng.com
Questions
Do you provide chiller calibration in the UAE?
Yes. Chiller calibration can be arranged in Dubai, Sharjah, Abu Dhabi, and at the customer’s site.
What is checked during chiller calibration?
The temperature sensors, probes, and controllers on the chiller are checked against a reference thermometer. The certificate shows the readings and the test date.
Do I receive a certificate?
Yes. A calibration certificate is issued for the sensor, probe, or controller that was checked.
Is this the same as temperature mapping?
No. Chiller calibration checks the sensor on the chiller. Temperature mapping checks many points inside a room. Mapping is on a separate page: https://caltech-eng.com/temperature-mapping/